Are you looking to replace the Pentair SpaBrite/AquaLight 250 watt Halogen Quartz Screw Base Bulb in your hot tub or spa? If so, you’ve come to the right place!
This guide will walk you through the steps of replacing your bulb and getting your hot tub or spa up and running again.
Step 1:
Unplug the power cord from the wall and turn off the power switch on the hot tub or spa. This will ensure your safety while working on the light.
Step 2: Locate the bulb.
The Pentair SpaBrite/AquaLight 250 watt Halogen Quartz Screw Base Bulb is located inside the light housing.
Step 3: Remove the bulb.
Carefully unscrew the bulb from the housing and set it aside.
Step 4: Install the new bulb.
Take the new bulb and screw it into the light housing. Make sure it’s securely in place.
Step 5: Replace the light cover.
Put the light cover back on and make sure it’s securely in place.
Step 6:
Plug the power cord back in and turn the power switch on to test the new bulb.
That’s it! You’ve successfully replaced the Pentair SpaBrite/AquaLight 250 watt Halogen Quartz Screw Base Bulb in your hot tub or spa. Now you’re ready to enjoy a relaxing soak in your hot tub or spa.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products!