How to Install Pentair 79131400Z 12-Volt 50-Watt Bulb

Are you looking for an easy way to upgrade your pool lighting? If so, consider installing a Pentair 79131400Z 12-Volt 50-Watt Bulb.

This bulb will provide your pool with a bright, safe light that will last for years to come. Installing this type of bulb is relatively easy, and in this blog post, we will walk you through the steps of installation.

Step 1: Turn off the power to the pool lighting circuit

This is an important step to ensure your safety while installing the bulb.

Step 2: Remove the old bulb from the fixture

You may need a screwdriver to remove the screws that hold the bulb in place.

Step 3: Install the new bulb into the fixture

Make sure the bulb is securely fastened and that the contacts are making good contact with the fixture.

Step 4: Connect the wires to the new bulb

This should be done carefully, as incorrect wiring could cause the bulb to malfunction or even cause an electrical fire.

Step 5: Test the bulb to make sure it is working properly

Turn the power back on and check the bulb for any signs of flickering or dimming.

Step 6: Replace the fixture cover

This will help protect the bulb from the elements and ensure it lasts for many years to come.

And that’s it! Follow the steps above and you can easily install a Pentair 79131400Z 12-Volt 50-Watt Bulb. With some basic tools and a bit of patience, you can have your pool lighting up and running in no time.

Thanks for reading, and happy swimming!

If you have any other questions about pool and spa products please do let us know - we are here to help! 

Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products!

Leave a comment