How to Replace Pentair 79112700 120-Volt 250-Watt Bayonet Bulb

If you are looking to replace your Pentair 79112700 120-Volt 250-Watt Bayonet Bulb, then you are in the right place. Replacing this type of bulb is not difficult, and the process is relatively straightforward.

Here’s an easy-to-follow guide on how to replace it.

1. Safety First:

Before you start any work, make sure to turn off the power to the light fixture.

2. Unscrew the Bulb:

To begin, you need to unscrew the bulb from the fixture. Carefully unscrew the bulb by twisting it counterclockwise.

3. Disconnect the Wires:

Now that the bulb is removed, you need to disconnect the wires. Be sure to note which wire is connected to which terminal.

4. Install the New Bulb:

Once the old bulb is removed, you can install the new bulb. Carefully connect the wires to the new bulb and then screw it into the fixture.

5. Switch the Power Back On:

Once the bulb is installed, you can turn the power back on.

That’s all there is to it! Replacing the Pentair 79112700 120-Volt 250-Watt Bayonet Bulb is a simple process that can take less than 10 minutes. If you follow these steps, you should have no trouble replacing your bulb.

Good luck!

If you have any other questions about pool and spa products please do let us know - we are here to help! 

Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.

Leave a comment