How to Install Pentair CVA-24T Valve Actuator

If you're looking to install a Pentair CVA-24T Valve Actuator, you've come to the right place! This guide will walk you through the process step-by-step, so you can get the job done quickly and safely.

Before you start, make sure to read the manufacturer’s instructions and ensure all necessary tools are on hand.

Step 1: Unpack and inspect the actuator

The first step is to unpack the actuator and inspect it for any damage or defects. If it appears to be in good condition, you can move on to the next step.

Step 2: Mount the actuator

Depending on the type of installation, you may need to use mounting brackets, bolts, and nuts to secure the actuator to a flat surface. Make sure the actuator is level and secure before continuing.

Step 3: Connect the wiring

Next, you'll need to connect the wiring between the actuator and the power source. This is usually done by wiring the actuator to a junction box. If you're not sure how to do this, consult a professional electrician.

Step 4: Test the actuator

After the wiring is complete, you can test the actuator to make sure it is working properly. To do this, press the "test" button on the actuator and watch the valve open and close. If it does not work, you may need to adjust the wiring.

Step 5: Install the valve

Finally, you can install the valve. Depending on the type of valve, this may require additional tools and hardware. Once the valve is in place, you're ready to use your new valve actuator.

Installing a Pentair CVA-24T Valve Actuator is a relatively straightforward process. Just make sure to read the manufacturer’s instructions and use the right tools and techniques to ensure a safe and successful installation.


If you have any other questions about pool and spa products please do let us know - we are here to help! 

Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.

Leave a comment