Are you looking to replace the Pentair 05601-0001 Stainless Steel Trim Face Ring Assembly? If so, you’ve come to the right place. This guide will show you step by step how to replace the face ring assembly.
Step 1: Gather the necessary tools and materials.
To replace the face ring assembly, you’ll need a screwdriver, a pair of pliers, and some lubricant. Make sure you have all of these items before you begin.
Step 2: Remove the old face ring assembly.
Using the screwdriver, remove the screws from the old face ring assembly and carefully remove it from the pool wall. Be careful not to damage the face ring assembly as you remove it.
Step 3: Clean the area.
Once the old face ring assembly has been removed, use the pliers to clean the area around the edge of the pool wall. This will ensure that the new face ring assembly can be installed properly.
Step 4: Install the new face ring assembly.
Apply a thin layer of lubricant to the area where the new face ring assembly will be installed. This will help ensure a tight seal. Place the new face ring assembly in position and secure it with the screws.
Step 5: Test the new face ring assembly.
Once the new face ring assembly has been installed, test it to make sure it is working properly. Check for any leaks and make sure the face ring assembly is securely in place.
That’s it! You’ve now successfully replaced the Pentair 05601-0001 Stainless Steel Trim Face Ring Assembly. If you followed the steps outlined in this guide, you should now have a properly functioning face ring assembly.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.