Are you looking to replace your Pentair 78887800 1-Inch Hub Vinyl Liner Mounting Bracket? If you’re dealing with a faulty or outdated bracket, then you’ve come to the right place.
Replacing your vinyl liner mounting bracket is a relatively simple process and can be done with a few basic tools. Follow this guide and you’ll have your new bracket installed in no time.
1. Begin by gathering the necessary tools and supplies. You’ll need a hacksaw, a flathead screwdriver, a Phillips screwdriver, a level, a piece of cardboard, and the new mounting bracket.
2. Start by removing the old mounting bracket. To do this, use the flathead screwdriver to loosen and remove the screws that hold the bracket in place. Once they’re loose, carefully remove the bracket and set it aside.
3. Now it’s time to install the new mounting bracket. Place the cardboard piece underneath the new bracket to protect the liner from sharp edges. Then, use the level to make sure the bracket is installed correctly.
4. Finally, use the Phillips screwdriver to secure the mounting bracket in place. Make sure to tightly secure the screws to ensure that the bracket is firmly attached.
And that’s it! You’ve successfully replaced your Pentair 78887800 1-Inch Hub Vinyl Liner Mounting Bracket. Now you can enjoy your pool with the peace of mind that comes from knowing your liner is safely and securely mounted.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.