Whether you own a pool, a spa, or both, you know that regular maintenance is important to keep them both running smoothly and looking their best.
One of the most important parts of a pool or spa is the lens gasket, and one of the most popular lens gaskets on the market is Pentair 79101600Z.
Replacing the Pentair lens gasket is a relatively simple job that you can do yourself. Here’s a step-by-step guide to help you through the process.
1. Gather your materials:
You’ll need a new lens gasket, a Phillips screwdriver, a flathead screwdriver, and a pair of pliers.
2. Remove the housing:
Use the Phillips screwdriver to remove the screws that hold the housing together. Once the screws are removed, carefully take the housing apart and set it aside.
3. Remove the old gasket:
Use the flathead screwdriver to pry off the old gasket. Be careful not to damage the surface of the housing.
4. Install the new gasket:
Place the new gasket into the housing, making sure that it’s aligned correctly. Use the pliers to gently press the gasket into place.
5. Reassemble the housing:
Once the gasket is in place, reassemble the housing and replace the screws.
That’s it! You’ve successfully replaced the Pentair 79101600Z lens gasket. Regular maintenance is key to keeping your pool or spa in good condition, so be sure to check all of your equipment on a regular basis.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.