Are you looking to install a Pentair 263060 2-Way CPVC 2-1/2 Inch (3 Inch Slip Outside) Pool and Spa Check Valve? If so, you’ve come to the right place. Installing this type of valve isn’t as difficult as you might think, and with our step-by-step guide, you’ll be able to do it in no time.
Before you get started, you’ll need a few tools and supplies. These include a hacksaw, a drill with a hole saw, a screwdriver, PVC glue, and a pair of adjustable pliers. It’s also a good idea to have a few extra pieces of CPVC pipe on hand in case you need to make any modifications.
Now, let’s take a look at the steps you’ll need to take to install your new check valve.
1. Measure and cut the CPVC pipe.
Measure the length of the pipe you’ll need to install the check valve, then cut the pipe to the correct size using the hacksaw.
2. Install the check valve.
Slide the check valve onto the pipe, then attach it using the screws provided. Make sure the arrow on the check valve is pointing in the correct direction.
3. Drill a hole.
Using the hole saw, drill a hole in the side of the pipe to accommodate the 2-1/2 inch (3 inch slip outside) connection.
4. Insert the connection.
Slide the connection into the hole and secure it with PVC glue.
5. Connect the pipes.
Use the adjustable pliers to connect the CPVC pipes to the check valve.
And that’s it! Installing the Pentair 263060 2-Way CPVC 2-1/2 Inch (3 Inch Slip Outside) Pool and Spa Check Valve is a relatively simple process. Just make sure to follow the steps outlined above and you should have no trouble getting it done.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.