This instruction explains you the steps to take in replacing the Polaris ATV Bottom Plate.The Polaris ATV Cleaner Bottom Plate helps the Polaris ATV Cleaner travel over sharp corners or high spots on the pool surface. After time, the Bottom Plate will wear down to a point where it has to be replaced.
1. ORDER PARTS - The first step is to order the parts you will need. The only part you may need for this procedure is the Polaris ATV Suction Cleaner BOTTOM PLATE. Note: the Polaris ATV and the Polaris 340 are the same product.
2. REMOVE BOTTOM PLATE - Turn the Polaris ATV Cleaner upside down and remove the Bottom Plate. It is held on with two screws.
3. REPLACE BOTTOM PLATE - Place the Bottom Plate into the triangular hole on the bottom of the Cleaner and secure it with two screws.
4. REPAIR IS COMPLETE - That's all there is. Your Polaris ATV Suction Cleaner is ready to go.
If you have any other questions about pool and spa products please do let us know - we are here to help!