There is a lot of responsibility that comes along with having a body of water in your backyard. But the benefits of cooling off in the summer, watching your kids have a blast and even having a little fun yourself make it all worthwhile. The following steps will help you to maintain your above ground pool:
1. The pump and filter form the heart of any above ground pool maintenance program, helping to keep your pool water clear. Pumps provide the force to circulate the water and push it through the filter. Ideally, you want to turn over all of the water in an above ground pool within an eight hour time period. This means that every drop of water has circulated through the filter within eight hours. The best time to run your pump is during the day, usually for 8 - 12 hours at a time. It is also important that the water circulates around the perimeter of your pool. Water in motion makes it harder for bacteria and algae to take hold and also directs more debris to your skimmer where it can be captured by your filter. Adjust the eyeball jets in your inlets to move your pool water in a circular motion.
2. Your above ground pool filter is there to catch and remove both visible debris and microscopic particles. Sand and D.E. filters are cleaned by backwashing when the filter's pressure gauge indicates levels 8 to 10 lbs. above normal (always follow manufacturer instructions). Cartridge filters have a cartridge inside that can be removed and washed using a garden hose. Eventually, the cartridge will need to be replaced to ensure that the filter is working effectively.
3. All above ground pools have areas with little or no circulation. These areas of minimal circulation are the breeding grounds for problems like algae growth. The walls and floor should be brushed and vacuumed once a week. Even if you use an automatic above ground pool cleaner, brushing once a week is a must.
4. Test your water regularly for two key factors: pH and sanitizers. By testing at least three times per week you will begin to understand how bather load, weather (rain and sun) and chemical application affect your pool water. Regular testing of pH and sanitizer levels will ensure crystal clear water all season long. A digital test strip reader will make this quicker and easier. It is vital that proper pH is maintained in your pool at all times. If the pH is outside 7.2 to 7.6 it will greatly reduce the effectiveness of pool chemicals. Test your pH level at least three (3) times a week and use either a pH Reducer or pH Increaser to bring the pH into the proper range. If you find it difficult to maintain your pH, check your total alkalinity and be sure it is in the ideal range. Adjust total alkalinity levels accordingly.
5. Chlorine tablets are the most common and efficient sanitizer to use in above ground pools. These tablets are compressed so that they dissolve slowly and steadily release free chlorine into your water to wipe out bacteria and keep your water clean. Chlorine also comes in sticks and granules. Whichever form you decide to use, you’ll want to look for stabilized chlorine which is processed to protect it from the sun's damaging rays, making the chemical last longer and work more effectively. Always keep chlorine in your skimmer, floater, or automatic feeder for continuous sanitizing.
6. As debris builds up in the water - from perspiration, suntan oil, hair spray and unfortunately, urine - it can cause eye and skin irritation and dull water. Often, chlorine is blamed for irritation and odor when in fact the real culprit is contaminants which tie up chlorine, keeping it from effectively sanitizing the water. When this happens, you should use shock which is basically a concentrated chemical treatment (usually chlorine). Shocking your above ground pool once a week will oxidize contaminants, freeing up the chlorine, and keeping your water crystal clear. Regular shock treatments will also kill resistant algae in the water. There are a variety of different products available including non-chlorine shock and shock designed for hard water areas.
7. Since algae are visible, it tends to be the pool problem that is most disturbing to pool owners. This is not surprising as no one wants to see black, green or yellow fuzz growing in their pool. In reality, it is not the algae that are harmful but the waste they produce by converting sunlight into food. This waste then feeds bacteria which is the real problem. Algae spores travel through the air and enter pool water. With just a few hours of sunlight on a warm day, algae can colonize your pool if your chlorine level is too low. The best way to combat algae is to never let them get started. Regularly checking to make sure your chemical levels are adequate and your pool water is balanced is vital. Adding algaecide is another preventative measure which will help prevent all types of algae from getting a foothold in your pool. You can use algaecide weekly to discourage algae growth.
8. If algae have already taken hold in your pool, there are some basic steps to follow. First, shock your pool and keep your water circulating 24 hours a day if possible. You are looking to achieve 10 ppm of chlorine. After shocking, you will need to brush and vacuum the entire pool. Follow up with an algaecide designed for your particular algae problem (most common are black, green and mustard algae). Brush and vacuum again and try to repeat this everyday. Check chlorine and add more if it’s below 5 ppm. It is also recommended that you regularly clean your filter during this process.
If you have any other questions about pool and spa products please do let us know - we are here to help!