Intex 28001E is an automatic pool cleaner that can clean the Intex swimming pool. It's made for those who own an above ground pool.
This is a water flow device that's connected to the inlet of a swimming pool. It uses the pool pump's cleaning power to move around.
This cleaner has four wheels that are designed to evenly distribute the water across the floor. These wheels are not powered and will not get stuck.
How to conect the Intex 28001E?
You can connect this adapter to the water return connector of an Intex pool. This component is a pressure-side pool cleaner that uses the water pressure to remove debris from the pool.
Can the Intex 28001E clean Intex above ground pools?
If you're not sure which adapter will fit your Intex pool, just follow this link and install it on the connector of your Intex pool cleaner. It will allow you to easily replace the hose that runs between the pool and the filter.
There are better options for cleaning above ground pools than intex.
And inground pools?
The Intex 28001E's pool cleaner hose has a maximum length of 24 feet. When connected together, this unit's hose has a total length of 24 feet.
Intex pool sizes vary depending on the location of the water return inlet. Generally, a rectangular pool with 18 feet of space can be expected to have a good flow.
What size pool pump will power it?
Intex recommends a filter pump that has a flow rate of 1600 to 3500 gallons per hour. Some owners suggest that a 1200GPH filter pump is too small to effectively perform the Intex's cleaning job.
Will this pool cleaner work with a sand filter pump?
A sand filter pump is required to function properly with the Intex automatic pool cleaner. Generally, it should only work if its flow and pressure are sufficient.
Can it clean sand and debris?
Intex's automatic pool cleaner will remove most of the debris and dirt on the floor. However, it will also blow the debris net into the pool cleaner's debris basket. To remove the net, use a garden hose to clean it.
The skimmer basket and the pool pump filter help keep the water clean.
Conclusion
Intex 28001E is not a pool vacuum. Instead, it is a pressure-side pool cleaner. It uses a filter pump to remove dirt and debris from the pool.
This Automatic Pool Cleaner is designed to automatically clean the pool using the flow of the water from the filter pump. This ensures that the machine can handle up to 3000 gallons of water.
It is very important that you regularly clean the pool filter and the debris bag. This will keep the Intex automatic pool cleaner running smoothly.
The Intex 28001E is an automatic pool cleaner that has small wheels. If your pool has a lot of wrinkles, these wheels might get stuck and stop working.
Intex 28001E Automatic Pool Cleaner
- Automatic above ground pool vacuum
- The newly designed Auto Pool Cleaner is a hassle free solution as it effectively vacuums the entire pool floor automatically
- For Intex pools with 1.5 inch hose fittings
- Performs optimally at 2,500 GPH
- Attaches to inlet connector in the pool with a 24.6 inch hose
- Requires filter pump with a flow rate between 1,600 3,500 GPH
- Weight: 18 pounds
- Warranty: 30 day Intex manufacturer warranty against manufacturer defects
BUY Intex 28001E Automatic Pool Cleaner
If you have any other questions about pool and spa products please do let us know - we are here to help!