Are you looking to replace your Pentair FNS SMBW Clean and Clear Pool Air Relief Valve? If so, you have come to the right place!
In this blog post, we will discuss how to replace the Pentair FNS SMBW Clean and Clear Pool Air Relief Valve.
- The first step is to turn off the power to the pool pump. This is to ensure that no electricity is running through the system while you are replacing the valve. Once the power is off, you should locate the valve and mark its position on the pipe. This will help you in the future should you need to replace it again.
- Next, you will need to disconnect the pipe from the valve. This can be done by using a wrench or a pair of pliers. After the pipe is disconnected, you can then remove the valve from the pipe.
- Now that the valve is removed, you can inspect it for any damage or wear and tear. If the valve is still in good condition, you can proceed to install the new Pentair FNS SMBW Clean and Clear Pool Air Relief Valve. To do this, you will need to insert the valve into the pipe and then secure it with the appropriate hardware.
- Finally, you will need to reconnect the pipe to the valve and turn the power back on to the pool pump.
With these simple steps, you should be able to successfully replace your Pentair FNS SMBW Clean and Clear Pool Air Relief Valve.
If you have any other questions about pool and spa products please do let us know - we are here to help!Â
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.