Description
Brand: In The Swim
Color: Multicolor
Features:
- Active ingredient 100% Cyanuric Acid
- Dosage: 2.5 lbs per 10,000 gallons
- Protects chlorine from harmful UVA/UVB rays
- For outdoor pool use
- Multiple quantities available
Details: In the Swim Pool Chlorine Stabilizer and Conditioner is designed to protect chlorine from the harmful effects of ultraviolet radiation (UV rays). The UV rays from the sun break down the chlorine's ability to sanitize and disinfect. If the chlorine isn't stabilized it very difficult to hold and maintain proper levels. It will also be very costly as you will be using three times more chlorine than a pool that's stabilized. Ideal stabilizer and conditioner levels are key to maintaining a good chlorine level. The ideal range is 30 - 50 ppm for a chlorinated pool (tablets) and 60 - 80 ppm in a saltwater environment. If stabilizer levels get elevated above the normal range. The chlorine will be over protected. If the chlorine is over protected, the water can become cloudy and green. It can't properly sanitize and disinfect the water. This can also be very costly. If stabilizer levels are high. If the temperature outside is above 85 degrees. A series of partial drains and refills is suggested. If the temperature outside is below 85 degrees. A complete drain and refill, is suggested. This will bring stabilizer level into normal range via dilution. To use In The Swim Chlorine Stabilizer and Condition first start by circulating the pool 3 - 4 hours. Test the stabilizer level with either a OTO/DPD droplet test kit, test strip, or digital tester. Determine the current stabilizer level in the pool. Once you have determine the current stabilizer level. Measure out the recommended dose of In The Swim Chlorine Stabilizer and Conditioner. Place into a chemical safe container. Mix with 9 parts of warm water. Stir with a plastic or wooden utensils, to start the dissolving process. Pour half that mixture into the skimmer with the skimmer running on full and the basket removed. Wait 3 - 4 hours and pour the remaining amount of conditioner into the skimmer. Do not clean the pool filter for 3 days. The stabilizer is still dissolving in the filter.
Package Dimensions: 14.0 x 12.0 x 11.0 inches
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.