TL;DR: Installing the Pentair 522104 ScreenLogic2 Interface & Wireless Connection Kit takes 1–2 hours and requires basic technical skills. This system enables smartphone and tablet control of IntelliTouch/EasyTouch automation systems from anywhere with internet access. Proper installation ensures reliable wireless connectivity, remote pool control, and enhanced convenience. Professional installation recommended for complex network configurations.
SEO Summary: This 2026 guide provides complete step-by-step instructions for installing and using Pentair 522104 ScreenLogic2 Interface & Wireless Connection Kit including setup, network configuration, app installation, and operation.
Related Categories
Table of Contents
Product Overview and Features
The Pentair 522104 ScreenLogic2 Interface & Wireless Connection Kit enables smartphone and tablet control of pool automation systems from anywhere.
Product Description:
- Part Number: Pentair 522104
- Type: Wireless interface and connection kit
- Connectivity: WiFi (wireless network connection)
- Compatibility: IntelliTouch and EasyTouch systems
- Control: Smartphone, tablet, and computer
- Access: Local network and remote internet access
Key Features:
- Wireless pool control from smartphone/tablet
- Remote access from anywhere with internet
- Real-time system monitoring
- Temperature control and adjustment
- Schedule programming and management
- Equipment on/off control
- Push notifications and alerts
- Multi-user access capability
What You Can Control:
- All pool and spa circuits (pumps, lights, features)
- Temperature setpoints for pool and spa
- Heater operation and modes
- Valve positions (pool/spa switching)
- Schedules and timers
- System status and alerts
- Equipment diagnostics
Benefits of ScreenLogic:
- Control pool from anywhere (home or away)
- No trips to equipment area needed
- Monitor pool status remotely
- Adjust settings on the go
- Receive alerts for issues
- Enhanced convenience and control
- Increased energy efficiency
System Requirements
Verify compatibility and requirements before installation.
Compatible Automation Systems:
- Pentair IntelliTouch i5, i7, i9, i10 systems
- Pentair EasyTouch 4, 8, PL4, PSL4 systems
- SunTouch systems (select models)
- Requires existing automation system installed
- System must have available communication port
- Works with IntelliTouch control panels
Network Requirements:
- WiFi router with 2.4GHz band (required)
- Stable internet connection
- Router within range of interface location
- WPA/WPA2 security (recommended)
- Available Ethernet port (for wired setup option)
- Adequate WiFi signal strength at pool equipment
Device Requirements:
- iOS device (iPhone, iPad) with iOS 12 or later
- Android device with Android 5.0 or later
- Windows PC or Mac computer (optional)
- ScreenLogic app (free download)
- Internet browser for web access
Power Requirements:
- 120V AC power outlet near installation location
- Power adapter included with kit
- Surge protector recommended
- Dedicated outlet preferred
Tools and Materials Needed
Minimal tools required for this straightforward installation.
Required Tools:
- Screwdriver (for mounting if needed)
- Drill with bits (for wall mounting)
- Ethernet cable (if using wired connection)
- Smartphone or tablet
- Computer (for initial setup)
Required Materials:
- Pentair 522104 ScreenLogic2 Interface Kit
- Power adapter (included)
- Mounting hardware (if wall mounting)
- WiFi network credentials (SSID and password)
Optional But Recommended:
- Ethernet cable for wired connection
- WiFi range extender (if signal weak)
- Surge protector
- Cable management clips
- Upgrade to ScreenLogic2 interface kits
- Add ScreenLogic2 interfaces for IntelliTouch and EasyTouch
Installation Procedure
Simple installation process for immediate wireless control.
Unboxing and Inspection:
- Remove ScreenLogic interface from packaging
- Verify all components included
- Inspect for shipping damage
- Locate power adapter and cables
- Review quick start guide
Location Selection:
- Choose location near automation control panel
- Within WiFi range of router
- Protected from weather and moisture
- Accessible for service
- Near power outlet
- Adequate ventilation for heat dissipation
Physical Installation:
- Mount interface on wall (optional) or place on shelf
- Ensure secure mounting if wall-mounted
- Position for easy access to connections
- Verify level and properly oriented
- Allow adequate clearance for cables
Connection to Automation System:
- Locate communication port on control panel
- Connect interface cable to control panel
- Secure connection firmly
- Route cable neatly
- Verify connection secure
Power Connection:
- Connect power adapter to interface
- Plug adapter into power outlet
- Verify power LED illuminates
- Interface performs startup sequence
- Wait for ready indicator
Network Configuration
Proper network setup ensures reliable wireless connectivity.
WiFi Setup (Wireless):
- Access interface setup mode (per instructions)
- Connect smartphone/tablet to interface WiFi network
- Open web browser to interface IP address
- Enter WiFi network credentials (SSID and password)
- Save network settings
- Interface connects to home WiFi network
- Verify connection successful
Ethernet Setup (Wired - Optional):
- Connect Ethernet cable from interface to router
- Interface automatically obtains IP address
- Verify connection LED illuminated
- Note IP address for access
- More reliable than WiFi (recommended if possible)
Network Verification:
- Verify interface connected to network
- Check connection status LEDs
- Ping interface IP address from computer
- Ensure stable connection
- Test from multiple devices
Remote Access Setup:
- Create Pentair account (if not already created)
- Register interface with Pentair cloud service
- Enable remote access in settings
- Verify remote access working
- Test from outside home network
App Setup and Configuration
ScreenLogic app provides intuitive pool control interface.
App Download:
- Download ScreenLogic app from App Store (iOS)
- Or download from Google Play Store (Android)
- Install app on smartphone/tablet
- Launch app after installation
- Grant necessary permissions
App Configuration:
- Launch ScreenLogic app
- App searches for ScreenLogic interface
- Select your interface from list
- Enter connection password (if set)
- App connects to automation system
- Verify connection successful
Account Setup:
- Create Pentair account (for remote access)
- Enter email and create password
- Verify email address
- Link interface to account
- Enable remote access
- Set up additional users if desired
App Customization:
- Name circuits for easy identification
- Set temperature display units (°F or °C)
- Configure notifications and alerts
- Customize home screen layout
- Set up quick actions
- Configure user preferences
Daily Operation
Understanding operation maximizes convenience and functionality.
Basic Control:
- Launch ScreenLogic app
- View current pool status on home screen
- Turn circuits on/off with single tap
- Adjust temperature setpoints
- Monitor equipment operation
- View system alerts
Temperature Control:
- Access temperature screen
- View current pool and spa temperatures
- Adjust temperature setpoints
- Enable/disable heater
- Monitor heating status
- Set temperature preferences
Schedule Management:
- Access schedule screen
- View existing schedules
- Create new schedules
- Edit or delete schedules
- Enable/disable schedules
- Set seasonal variations
Remote Access:
- Control pool from anywhere with internet
- Monitor status while away from home
- Adjust settings remotely
- Receive push notifications
- View equipment status
- Troubleshoot issues remotely
Multi-Device Access:
- Install app on multiple devices
- All devices access same system
- Changes sync across all devices
- Multiple users can control pool
- Set user permissions if needed
Troubleshooting Common Issues
Addressing problems ensures reliable wireless control.
App Can't Find Interface:
- Cause: Interface not on same network
- Solution: Verify interface connected to WiFi, check network settings
- Cause: Firewall blocking connection
- Solution: Configure router firewall settings
- Cause: Interface powered off
- Solution: Check power connection, verify power LED on
Remote Access Not Working:
- Cause: Remote access not enabled
- Solution: Enable remote access in interface settings
- Cause: Account not linked
- Solution: Link interface to Pentair account
- Cause: Internet connection down
- Solution: Verify internet connectivity
Intermittent Connection:
- Cause: Weak WiFi signal
- Solution: Move interface closer to router or use WiFi extender
- Cause: Network interference
- Solution: Change WiFi channel, reduce interference sources
- Cause: Router issues
- Solution: Restart router, update firmware
Commands Not Executing:
- Cause: Communication error with control panel
- Solution: Check cable connection, restart interface
- Cause: Control panel issue
- Solution: Verify control panel operating normally
- Cause: Interface firmware outdated
- Solution: Update interface firmware
Conclusion and Key Takeaways
Installing the Pentair 522104 ScreenLogic2 Interface & Wireless Connection Kit takes 1–2 hours and provides convenient smartphone control of your pool automation system. Proper installation with correct network configuration ensures reliable wireless connectivity and remote pool control from anywhere. The investment in wireless automation enhances convenience and pool enjoyment.
Essential Takeaways:
- ScreenLogic2 enables smartphone control of IntelliTouch/EasyTouch systems
- Requires WiFi network with 2.4GHz band
- Compatible with iOS and Android devices
- Install interface near automation control panel
- Connect interface to control panel communication port
- Configure WiFi settings through web interface
- Download ScreenLogic app from App Store or Google Play
- Create Pentair account for remote access
- Link interface to account for cloud connectivity
- Control all circuits, temperatures, and schedules remotely
- Receive push notifications for alerts and issues
- Multiple users can access same system
- Wired Ethernet connection more reliable than WiFi
- Update firmware regularly for best performance
- Troubleshoot connection issues by checking network settings
- Upgrade to EasyTouch systems with ScreenLogic included
- Add MobileTouch wireless control panels
- Install spa-side remotes for additional control
- Use spa-side remote mud boxes for protection
- Wireless control saves 10+ trips to equipment area daily
- Shop quality automation parts from our pool parts collection
Follow these installation steps for professional-quality results. Proper ScreenLogic2 setup provides years of convenient wireless pool control with enhanced functionality and remote access. The investment in wireless automation pays dividends in comfort, convenience, and enhanced pool enjoyment.
