Are you having trouble replacing the Pentair 78244300 1-Inch Rear Hub Assembly? Don’t worry, because replacing this part is easier than you think.
This guide will provide you with the information you need to replace the Pentair 1-Inch Rear Hub Assembly in no time.
Step 1: Turn Off the Power
Before attempting to replace the Pentair 78244300 1-Inch Rear Hub Assembly, ensure that the power to your pool pump is turned off. This will ensure your safety while you are replacing the part.
Step 2: Remove the Pump Basket
Next, you will need to remove the pump basket to access the rear hub assembly. To do this, locate the screws that hold the basket in place and remove them. Once the screws are removed, you can carefully lift the basket out of the pump.
Step 3: Remove the Rear Hub Assembly
Now that the pump basket has been removed, you can access the rear hub assembly. Unscrew the bolts that hold the hub in place, and then carefully remove the assembly from the pump.
Step 4: Install the New Hub Assembly
Once the old hub assembly has been removed, you can now install the new one. Place the new hub in the same position as the old one, and then secure it in place with the bolts.
Step 5: Reinstall the Pump Basket
Once the new hub is secured in place, you can now reinstall the pump basket. Make sure it is correctly aligned, and then secure it in place with the screws.
Step 6: Turn On the Power
The last step is to turn the power back on to the pump. Once the power is back on, your new 1-Inch Rear Hub Assembly should be operational.
Replacing the Pentair 78244300 1-Inch Rear Hub Assembly is a straightforward process that can be completed in a few steps. Just make sure to follow the steps outlined above, and you’ll have the part replaced in no time. Good luck!
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.