Are you dealing with a leaking Pentair 670044 Cord Seal Grommet Kit Assembly? If so, you’re not alone. This grommet kit is a common source of leaking in pool pumps and heaters, and replacing it is a relatively easy task. In this blog post, we’ll walk you through the steps of replacing the Pentair Cord Seal Grommet Kit.
Let’s get started!
1. Gather the correct tools.
Before you start, make sure you have the right tools. You’ll need a flat head screwdriver and a Phillips head screwdriver.
2. Unplug the power cord.
Before you do anything else, unplug the power cord from the outlet. Safety first!
3. Remove the screws.
Use your Phillips head screwdriver to remove the screws that hold the grommet kit in place.
4. Pull out the grommet kit.
Once the screws are removed, carefully pull the grommet kit out of the hole in the side of the pump or heater.
5. Install the new grommet kit.
Place the new grommet kit into the hole and use the flat head screwdriver to secure it in place with the screws.
6. Plug in the power cord.
Once the grommet kit is in place, plug the power cord back into the outlet.
And that’s it! Replacing the Pentair 670044 Cord Seal Grommet Kit Assembly is a simple process that anyone can do. With the right tools and a few minutes of your time, you can have your pool pump or heater running like new.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.