If you own a Pentair pool lighting system, you may need to know how to replace the Pentair 520406 Dimmer Module.
This dimmer module works to control and adjust the intensity of your pool lights. Replacing the dimmer module is a relatively simple process and can be completed in just a few steps. Here’s what you need to know:
Step 1: Gather Your Tools
Before you begin, it’s important to gather the tools you’ll need to complete the job. You’ll need a flat head screwdriver, a Phillips head screwdriver, and a pair of needle nose pliers.
Step 2: Disconnect the Power
Before you begin, you’ll need to make sure the power to your pool lighting system is disconnected. This can be done by turning off the breaker that controls the pool lighting.
Step 3: Remove the Old Dimmer Module
Once the power is disconnected, you’ll need to remove the old dimmer module. To do this, you’ll need to use a flat head screwdriver to remove the screws that hold the dimmer module in place. Once the screws are removed, you can gently pull the dimmer module away from the wall.
Step 4: Install the New Dimmer Module
Now that the old dimmer module is removed, you’ll need to install the new one. To do this, you’ll need to use a pair of needle nose pliers to connect the wires to the new dimmer module. Once the wires are connected, you can then use a Phillips head screwdriver to secure the dimmer module to the wall.
Step 5: Restore the Power
Once the new dimmer module is installed, you can then restore the power to your pool lighting system. This can be done by turning the breaker back on.
And that’s it! Replacing the Pentair 520406 Dimmer Module is a relatively simple process and can be completed in just a few steps. With these steps, you should have no problem replacing this important piece of equipment in your pool lighting system.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products!