Are you looking to replace the Pentair 360261 Water Management Kit (788379862862)? This guide will provide you with a step-by-step guide on how to replace this water management kit.
The Pentair 360261 Water Management Kit is a great product for pool owners who want to keep their pool water clean and healthy. However, if the kit is not working properly, it may be time to consider replacing it. Replacing the kit is not a difficult task, so let’s get started.
Step 1
The first step is to find the replacement parts for the kit. You can find the replacement parts at any pool supply store, or you can order them online. Make sure to get all the parts that are listed in the kit, including the control panel, the flow switch, the pressure gauge, and the O-ring gasket.
Step 2
Once you have all the parts, it is time to start the installation process. Start by disconnecting the power to the pool’s pump. Then, use a flathead screwdriver to remove the screws that are holding the control panel in place.
Step 3
Now, you can remove the old control panel and install the new one. Make sure to follow the instructions that are included with the new control panel. Once the new panel is installed, you can reconnect the power and test the system.
Step 4
After the control panel is installed, it is time to install the flow switch. Start by disconnecting the power to the pool’s pump again. Then, use a flathead screwdriver to remove the screws that are holding the old flow switch in place.
Step 5
Now, you can install the new flow switch. Make sure to follow the instructions that are included with the new flow switch. Once the new flow switch is installed, you can reconnect the power and test the system.
Step 6
Finally, you can install the pressure gauge and the O-ring gasket. Start by disconnecting the power to the pool’s pump again. Then, use a flathead screwdriver to remove the screws that are holding the old pressure gauge and the O-ring gasket in place.
Step 7
Now, you can install the new pressure gauge and the O-ring gasket. Make sure to follow the instructions that are included with the new components. Once the new components are installed, you can reconnect the power and test the system.
After following these steps, you should have a successfully replaced the Pentair 360261 Water Management Kit 788379862862. This guide should make the process of replacing the kit much easier. Good luck!
If you have any other questions about pool and spa products please do let us know - we are here to help!Â
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.