If you own a Pentair pool light and the bulb has gone out, you'll need to replace it. Replacing a Pentair 34600-0010 120-Volt 100-Watt Bulb is a relatively simple process, and can be done with a few simple steps.
Step 1: Turn off the power to the light.
Make sure that the power is disconnected before attempting to replace the bulb.
Step 2: Remove the light fixture from the wall.
To do this, you’ll need to unscrew the screws that are holding the light in place. Then, carefully remove the light from the wall.
Step 3: Remove the bulb from the light fixture.
You may need to use a screwdriver to unscrew the bulb from the light fixture.
Step 4: Replace the bulb.
Once the old bulb is removed, replace it with the new Pentair 34600-0010 120-Volt 100-Watt Bulb. Make sure the bulb is screwed in tightly for a secure fit.
Step 5: Reattach the light fixture to the wall.
Secure the light fixture to the wall by screwing the screws back into place.
Step 6: Turn the power back on.
Once you’ve followed these steps, your Pentair pool light should be working again. Make sure to periodically check the bulb to make sure it is working properly. If you ever need to replace the bulb again, simply follow the steps outlined above.
If you have any other questions about pool and spa products please do let us know - we are here to help!Â
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products!