If you’re looking to upgrade the lighting in your pool or spa, installing a Pentair SpaBrite or AquaLight lens is a great way to do it. Installing one of these lenses isn’t a difficult process, but it does require some steps to ensure the lens is installed correctly.
Here is a guide on how to install a Pentair SpaBrite or AquaLight Lens.
Step 1. First, you will need to turn off the power to the light you are replacing. This is important for safety reasons and to ensure the installation process goes smoothly.
Step 2. Next, you will need to remove the existing lens. To do this, use a screwdriver to loosen the retaining screws and carefully remove the lens.
Step 3. Once the lens is removed, you will need to clean the light housing to ensure that the new lens will fit properly. Use a damp cloth to remove any dirt or debris.
Step 4. Now, it’s time to install the new lens. Gently place the lens into the light housing and make sure it is properly aligned.
Step 5. Finally, use a screwdriver to secure the lens with the retaining screws. Make sure the screws are tight, but not overly tight, to avoid damaging the lens. Once the lens is installed, turn the power back on and test the light. If everything is working properly, you now have a brand new Pentair SpaBrite or AquaLight lens!
Installing a Pentair SpaBrite or AquaLight lens is a simple process that can take your pool or spa’s lighting to the next level. Just follow the steps outlined above and you’ll have a beautiful new lens in no time.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products!