Are you looking to replace the vacuum manifold assembly in your Pentair R201756 Commercial Vacuum System? If so, you’ve come to the right place!
Replacing the vacuum manifold assembly on this system is a simple and straightforward process that you can do yourself. Here’s what you need to know to get the job done.
Step 1
First, you’ll need to gather the necessary replacement parts. The Pentair R201756 Commercial Vacuum System requires the following parts for the vacuum manifold assembly replacement:
- Vacuum manifold assembly
- Vacuum hose
- Vacuum filter
- Vacuum relief valve
- Vacuum gauge
- Vacuum switch
Step 2
Once you have all of the necessary parts, you’re ready to begin the installation process. Start by disconnecting the power to the vacuum system. Then, remove the old vacuum manifold assembly and the associated parts. Be sure to label the parts as you remove them so that you know where they go when you’re reinstalling them.
Step 3
Next, you’ll need to install the new vacuum manifold assembly. Connect the vacuum hose to the inlet and outlet of the manifold. Then, install the filter and relief valve.
Step 4
Finally, install the vacuum gauge and switch. Once all of the parts are installed, you’ll need to check for proper operation. Turn on the power and check the vacuum gauge and switch for proper operation. You should also inspect the system for any leaks or other issues. If everything looks good, then you’re done!
Installing the vacuum manifold assembly in your Pentair R201756 Commercial Vacuum System is a simple and straightforward process. With the right parts and a little bit of time, you can have your system up and running again in no time. Good luck and happy vacuuming!
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products!