Are you looking to install the Pentair 87206300 Vinyl Gasket? If so, you’ve come to the right place! Installing this gasket is a relatively straightforward process, but there are a few steps to take to ensure a successful installation. In this blog post, we’ll walk you through the process of installing the Pentair Vinyl Gasket.
First, you’ll need to gather the necessary tools and materials. These include a screwdriver (Phillips or flathead), a pair of pliers, the gasket, and a tube of silicone sealant. Once you have all of the necessary tools and materials, you’re ready to start the installation process.
Begin by locating the existing gasket on your pool filter. Carefully remove the existing gasket using the screwdriver and pliers.
Next, take the new gasket and apply a generous amount of silicone sealant to both sides. Make sure that you don’t skimp on the amount of sealant, as this will ensure a watertight seal. Once the sealant has been applied, you’re ready to install the gasket.
First, position the gasket along the perimeter of the filter housing. Next, secure the gasket using the screwdriver and pliers. Make sure that all screws are properly tightened.
Finally, allow the sealant to cure for 24 hours before turning on the filter. This will ensure that the sealant has had enough time to cure and that the gasket is firmly in place.
And there you have it! You’ve now successfully installed the Pentair 87206300 Vinyl Gasket. With a few simple steps, you can ensure that your pool filter is running smoothly and efficiently.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.