Are you looking for an easy way to install your Pentair 77707-1461 Conversion Kit?
Installing a Conversion Kit for your pool or spa can be a daunting task, but with the right instructions and tools, you can successfully install your kit in no time.
Here is a step-by-step guide on how to install your Pentair 77707-1461 Conversion Kit.
Step 1. Start by gathering the necessary tools and materials. You will need a Phillips head screwdriver, a pair of pliers, a flathead screwdriver, a wrench, and the Pentair 77707-1461 Conversion Kit.
Step 2. Make sure the power to your pump is turned off. Unscrew the four screws on the back of the pump and remove the pump lid.
Step 3. Remove the existing motor from the pump and set it aside.
Step 4. Place the new motor in the pump, making sure it is properly aligned.
Step 5. Secure the motor in place with the four screws.
Step 6. Connect the black and white wires from the motor to the electrical terminals on the pump.
Step 7. Secure the wires with the provided wire ties.
Step 8. Attach the drive shaft to the motor and attach the coupler to the drive shaft.
Step 9. Secure the drive shaft with the provided screws.
Step 10. Reconnect the power to the pump and turn it on.
Step 11. Test the pump to make sure it is working properly.
By following these simple steps, you can easily install your Pentair 77707-1461 Conversion Kit.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products!