Are you looking to replace your old sand drain and install a new Pentair 152220Z Sand Drain Replacement Kit? If so, you’re in luck. In this blog post, I’ll walk you through the process of installing your new sand drain.
Step 1: Shut off the power to the pump and filter.
Before you begin, it’s important to shut off the power to the pump and filter. This will ensure that everything is properly disconnected and will help prevent any electrical shock.
Step 2: Disconnect the existing sand drain and remove it.
Once the power is shut off, disconnect the existing sand drain from the filter and remove it. Make sure that you unplug the drain hose from the drain port, and then unscrew the drain from the filter.
Step 3: Install the new Pentair 152220Z sand drain.
Once the old sand drain has been removed, you can now install the new Pentair 152220Z Sand Drain Replacement Kit. Start by attaching the new drain to the filter, and then plug the drain hose into the drain port.
Step 4: Secure the drain into place.
Once the new drain is in place, you will need to secure it into place. To do this, you should use a pair of pliers to tighten the drain into the filter. Make sure that it is firmly secured in place.
Step 5: Replace the lid on the filter.
Once the drain is securely in place, replace the lid on the filter. This will help ensure that the drain is properly sealed and will help prevent any leaks.
Step 6: Restart the pump and filter.
The last step is to restart the pump and filter. Once the power is back on, you’re all set.
Congratulations! You’ve successfully installed the Pentair 152220Z Sand Drain Replacement Kit. If you’ve followed all of the steps outlined in this blog post, you should now have a properly functioning sand drain.
If you have any other questions about pool and spa products please do let us know - we are here to help!
Also don't forget to subscribe to our YouTube channel and check out our videos with other great pool and spa products.